Home Products Jig Grinder JG-1010G

JIG GRINDER

JG-1010G


  • Feature:

     

    JG-1010G double column jig gringer with superstructure fabricated by granite, which is well-known by its excellent damping, low heat conductivity, rust-proof, and corrosion resistance, is capable of stabilizing the machine accuracy and enhancing the roughness on workpiece.

     

    Stiffness and accuracy is also enhanced with the motors on three axis (X,Y,W) direct-driven design transmission.

     

    C1 grade ballscrew was adopted, pre-tension by 3∘C in temperature increment, which is effectively upgrading stiffness and preventing from deformation during operation.

     

    NSK P4 heavy load ultra precise linear guideway with rail width of 45 mm is adopted in 3 axis (X,Y,Z) and has a wider engagement in order to a low deformation, high strength, vibration resistance as well as capability of max feed speed of 24 m/min.

     

    Feeding movement of Z axis is driven by linear motor, which features instrument with hyper responsiveness, rigidity, high speed, excellent acceleration, and no backlash and not only simplifies the superstructure but also fulfills rapid and precise machining process.

     

    Besides, the two additional German-made vibration insulation pads are also incorporated inside to assure the accuracy and quality.

  • WORK RANGE OF THE SLIDES
      JG-1010G
    RANGE OF MOVEMEMT  
    X Axis 1000 mm (39.4" )
    Y Axis 1000 mm (39.4" )
    Z Axis 250 mm (9.8" )
    W Axis 400 mm (15.7" )
    MAX FEED SPEED  
    X, Y Axis 24 m / min
    Z Axis 24 m / min
    READING RESOLUTION  
    X, Y Axis 0.01 um
    Z Axis 0.01 um
    Cs Axis 0.001 deg
    LOCATION ACCURACY  
    X, Y Axis ±0.0015 mm
    POSITION CODER  
    X, Y Axis Linear encoder
    Z Axis Linear encoder
    Cs Axis Magnetic sensor
    TABLE  
    Table (LxW) 1200x1200 mm (47.2"x47.2")
    PERMISSBLE LOAD (MAX) 1500 kg
    NUMBER OF T-SOLT 9
    SHAPE OF T-SOLT 12.0 mm (Width)
    WORK RANGE OF THE GRINDING HEAD  
    GRINDING-SPINDLE SPEEDS  
    ELECTRICAL GRINDING HEAD(MAX.) 30000 rpm or 40000 rpm
    WITH HIGH SPEED GRINDING HEAD(MAX.) 60000 rpm
    PLANETARY SPEED 5~200 rpm
    BORE-DIAMETER CAPACITY 0.5~250 mm (0.02"~9.8")
    MAX.DIAMETER OF WHEEL Ø180 mm (dia 7.1")
    COLLETS Ø3, Ø6, Ø10 mm
    U AXIS LAST INPUT INCREMENT 0.001 mm
    U AXIS MAX. STROKE 30 mm (1.18")
    COOLING SELF BY INPUT Air
    LUBRICATION Oil-mist
    WEIGHT 3.5 kg
    MOTOR  
    X AXIS (Servo) 4.0KW (22Nm)
    Y AXIS (Servo) 4.0KW (22Nm)
    W AXIS (Servo) 1.6KW (8Nm)
    Z AXIS 6.8KW
    Cs AXIS 0.55KW Spindle
    U AXIS Stepping
    OUTER DIMENSIONS AND WEIGHT  
    LENGTH 4600mm
    WIDTH 4000 mm
    HEIGHT (MAX.) 3600 mm
    HEIGHT (MIN.)  
    WEIGHT 12500 kg
    POWER REQUIREMENT  
    VOLTAGE 220v ± 10%
    MAX. VOLTAGE CONSUMPTION 17.5KW
    COMPRESSED AIR 7 kg / cm2
    AIR CONSUMPTION 420 nl / min
    NC CONTROLLER FUNCTION  
    NC CONTROLLER Fanuc 31i-A
    NUMBER OF CONTROLLED AXES 20 axes
    SIMULTANEOUSLY CONTROLLED AXES 4 axez
    CS CONTOURING CONTROL 1 axes
    CHOPPING FUNCTION Built-in
    LAST INPUT INCREMENT 0.0001 mm / 0.0001 deg
    MAX. STROKE ± 9999.9999 mm / ± 9999.9999 deg
    RAPID TRAVERSE MAX 100 m / min
    RAPID TRAVERSE OVERRIDE F0, 25, 50, 100
    FEED PER MINUTE mm / min
    MANUAL HANDLE FEED 4 axes
    MANUAL HANDLE FEED RATE x1, x10, x100, x1000
    TAPE CODE (AUTO.RECOGNITION) EIA / ISO
    LENGTH STORAGE BY PROGRAM 640 m
    PARITY CHECK Horizontal and vertical parity